Middle-East and Africa Fluoropolymers Market

MEA Fluoropolymers Market Analysis

The Middle-East and Africa Fluoropolymers Market is expected to register a CAGR of greater than 5% during the forecast period.

• Hazardous working conditions are expected tohinder the growth of the market studied.
• Growing use of green and sustainable fluoropolymer is expected to create opportunities to the market growth in the coming years.

MEA Fluoropolymers Market Trends

Polytetrafluoroethylene (PTFE) Segment to Drive the Fluoropolymers Market

• PTFE dominates the market in the fluoropolymer resin market due to its wide usage in various end-user industries.
• Polytetrafluoroethylene (PTFE) is a fully fluorinated polymer made by a polymerization of the monomer CF2=CF2 - tetrafluoroethylene (TFE). The products which have the ingredients of granular PTFE resin offer the superior properties of fluoropolymers, for example, retention of properties after service at 260℃, useful properties at -240℃, chemical inertness to nearly all industrial chemicals and solvents low friction and anti-stick surfaces.
• PTFE resin has outstanding dielectric properties and stable frequency and temperature. With moderate stiffness and high ultimate elongation, this product can be used to make tubes, sheets, rods, films and other articles, such as bearings, gaskets, pistons, and sliding bearings for bridges, etc.
• PTFE is resistant to attack from most chemicals and when combined with other fluoropolymers, such as FEP and PFA, it greatly enhances the life of the component. PTFE applied as a surface coating may increase the corrosion resistance of the component and can also be enhanced with the use of primers, other pre-treatments, such as plating and phosphating. Stud bolts and fasteners, valves, pumps, pipe clamps, and connectors benefit from these type of coatings.
• Thus, from the aforementioned points, we can see the continuous demand for fluoropolymers in the forecast period.

Saudi Arabia to Dominate the Market

• Saudi Arabia is one of the largest producers of oil and gas in the world. The demand for fluoropolymers is likely to increase with the rising investment in the oil and gas sector.
• Saudi Arabia has emerged as a rapidly growing energy consumer in the Middle East region. The high national industrialization program, in addition to the rapid urbanization, has led to an increase in the power demand by 7-10%, year-on-year. Turbines, pumps, bearings, fans, compressors, gears, and hydraulic systems utilize a significant volume of fluoropolymer coatings in the power generation sector. Many new power generation projects are in the offing, which in turn, will result in a modest rise in the demand for fluoropolymer coatings in the country.
• There is an increase in the constructions of hotels, recreational facilities, and other public infrastructure in the country, to cater to the increasing number of tourists. Government initiatives, such as the Saudi Arabia Vision 2030 are expected to support the growth of the commercial building activities at significant growth, in the coming years. Growing construction activities in the country will increase the consumption of fluoropolymers in the country.

MEA Fluoropolymers Industry Overview

The Middle-East and African fluoropolymers market is consolidated in nature. Strong backward integration of major manufacturers, such as Solvay, DuPont, and AGC creates a stiff competition in the market.

MEA Fluoropolymers Market Leaders